GF54.65-P-0001-02C Parktronic system (PTS), location of components Model 208 with code 220a Parktronic system (PTS)

P54.65-0301-09

A42b1 Left outer sensor, front bumper
A42b2 Left center sensor, front bumper
A42b3 Left inner sensor, front bumper
A42b4 Right inner sensor, front bumper
A42b5 Right center sensor, front bumper
A42b6 Right outer sensor, front bumper
A43b7 Right outer sensor, rear bumper
A43b8 Right inner sensor, rear bumper
A43b9 Left inner sensor, rear bumper
A43b10 Left outer sensor, rear bumper
  A44/1 PTS warning display,
left side of instrument panel

A44/3 PTS warning display,
rear dome lamp

A44/4 PTS warning display,
center of instrument panel

F1 Fuse and relay box F1
N62 PTS control module
S95 PTS on/off switch
X11/4 Data link connector

GF54.65-P-0001A
GF54.65-P-0001A Parktronic system (PTS), function 18.5.98

MODEL  140, 163, 168, 202, 203, 208, 210, 215, 220 with CODE (220a) Parktronic System (PTS)


Shown on model 140

a Detection range
b Driver's field of view
c Area not detected

Dimensions in cm
 
    P54.65-0210-05

Model 168

a Detection range
b Driver's field of view
c Area not detected

Dimensions in cm
 
    P54.65-2016-06

General
The Parktronic system (PTS) is an ultrasonic measurement system for detecting the range to an obstruction in critical situations. It assists the driver in parking and maneuvering situations at speeds below 15 km/h.
The sensors in the front and rear bumpers emit ultrasound signals which are reflected by an obstacle in the detection range. The echoed ultrasound signals are received by the sensors and their journey time is measured.
The control module uses the journey time of the echo to calculate the distance between the vehicle and the obstacle, and actuates the warning displays.
 
The distance between the vehicle and the obstacle is indicated to the driver visually and acoustically.
The brightness of the warning displays can be adjusted to suit the ambient brightness automatically or manually depending on the model series. (See "warning display, function").
The Parktronic system (PTS) is activated when the ignition is switched on.
The system is active even if it was manually deactivated during the last journey.

GF54.65-P-4104A
GF54.65-P-4104A Warning display, location / task / design / function 28.4.98

MODEL  140, 163, 168, 202, 203, 208, 210, 215, 220 with CODE (220a) Parktronic System (PTS)


Diagram left:
Warning display, model 140
1 Frame
2 Yellow segments
3 Red segments

Diagram right:
Warning display, models 168, 202, 203, 208, 210, 215, 220
1 Frame (split: the frame is yellow in the area of the yellow segments and red in the area of the red segments)
2 Yellow segments
3 Red segments
   
    P54.65-2031-01   P54.65-2032-71

Warning display, model 163
1 Yellow diodes
2 Red diodes
 
    P54.65-2409-01

  Warning display, task Displays the distance to an obstacle within the front and rear detection ranges.
If a minimum range is violated: Emits an acoustic warning signal.
 
  Warning display, design The warning displays consist of the following visual display elements:
- Models 140,168, 202, 203, 208, 210, 215, 220
LCD bar displays with 6 yellow and 2 red segments and frame
- Model 163
LED displays with 6 yellow and 2 red light emitting diodes
The acoustic signal generator and the microprocessor which evaluates and transforms the data messages from the control module.The voltage is supplied to the warning displays via the control module.